Type:
Rolling Machine Power Source: Electric Certification: SGS, ISO9001, CE Customized: Customized Condition: New Speed: Max 30m/Min Specification: CE, SGS HS Code: 84552210 Forging Forming Method: Mold Forging Feature: High Efficiency Warranty: 12 Months Advantage: Use Widely Color: Blue and Yellow Trademark: Saibo Origin: Jiangsu, China The production flow of equipment
De-coiler→ feeding & guide→roll forming→straighten→post track cutting →manual out table
Feeding & guide→roll forming→straighten→post track cutting
Feeding
Armed adjustable center of the forming rollers and of sufficient length to prevent lateral movement of the strip on its entry to flattener.
Entrance table-guide: adjustable
Entrance width:35-130mm (according the final design)
Entrance and guide roller: diameter is ¢76mm, material is sae1045, HRC48-52° surface with chrome
Forming Section
Profile steel thickness 2.0-5.0mm
Main motor power: 22Kw, AC motor, side motor to save space (Brand: Siemens which made in China)
Machine Voltage, Frequency, Phase: 380 V, 50 Hz, 3Phase
Roll station:8stations +1 station of straighten
Roller material:Gcr15, 58-62,HRC hardness and chrome plated surface
Shaft diameter: ¢85mm material: SAE1045
Machine roll forming speed:0-30m/min
The min. Roll forming Speed: 0m/min
The maximal roll forming speed: 30m/min
Roll former has leveling bolts in the base for adjust the leveling
Machine base frame adopt H beam welding steel
In the main
roll forming machine have 1 button for urgency stop if happen any malfunction.
Transmission: by gear box, joint with coupling, gear inside box structure is bevel gear
Machine stand adopt cast iron
Straighten device:
one station after roll forming,
Function: for revise the end product up and down/ left and right to straightness
Roller material: Roller material: GCR15 quenched 58°-62°finishing turning CNC
Adjust by hand wheel
To avoid accidents, the drive parts will be covered by protective cover
Post track cutting system
Cutting after forming: Cut the sheet after roll forming to required length
Cutting Type: hydraulic servo motor tracking cutting
Servo motor: 4kw
Material of blade:Cr12, 58-62 HRC hardness
Cutting power by hydraulic, 11KW with Storage tank
Working pressure: 25Mpa adjustable
Length measuring: Automatic encoder length measuring, brand: Omron
The cutting sequence is also contained and controlled by the same PLC program installed on the above.
Tolerance of length: 3000mm+/- 1.5mm
Hydraulic station:
Hydraulic power:11kw
Working pressure: 25Mpa adjustable
Solenoid valve: 1 group
Hydraulic oil: 46# hydraulic oil
Contact us if you need more details on Angle
Roll Forming Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Forming Machine、Rolling Machine. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Cold steel roll forming machine
